It’s a hot rolling mill and uses steel billets as raw material. In par with the technology development, the company also does up-gradation of its products time to time. Hence in the market there is a sustained acceptance of its TMT Bars which is branded as MSBS.

Presently the products are conforming to the Grade 500 B as per the latest BS 4449:2005 standard. Quality of the steel bars is assured by stringent inspection and testing with sophisticated machines.



Reinforcement Bars (Rebars)of higher strength produced directly from pure steel billets.
High quality bars from our newly installed Automatic Continuous Rolling Mill.

Size :
  8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm and 32 mm

All the sizes have been approved by the Directorate General for Specifications and Measurements, Ministry of Commerce and Industry, Sultanate of Oman.

Standard Length of 12 mtrs

Size in mm 8 10 12 14 16 18 20 22 25 32
No of bars per standard bundle 420 270 184 136 104 82 66 55 42 26

As per the customer requirement we can produce Rebars to the following specifications:

BS  4449:2005 Grade B500B
BS  4449:1997 Grade 460B
ASTM A-615   Grade 60

Cut and Bend :

Rebars in the form of Cut and Bend also available against customer demand.

Important Features of our Rebars :

  • MAJAN STEEL BARS are made directly from pure Steel Billets.

  • Steel Billets have been taken from the standard manufacturers. Billets are issued for Rebar production only after certification by the QC Department.

  • Controlled Chemistry of the Billets and supervision of the Rolling Process by the expert Engineers help us to get the consistent quality for our Rebars.

  • The controlled Thermo Mechanical Treatment provides the bars an optimum combination of High Strength and Ductility.

  • Computerized Numeric Controlled ( CNC ) Rib Cutting Machines are used to make the uniform and adequate Transverse Ribs on the Rebars. This ensures better Bonding of steel with concrete which enhances the strength of  construction.

  • Good results in Bend and Re-bend test and hence suitable for Bending works.

  • Low Carbon Content and restricted Carbon Equivalent (CE) Value helps to get superior weldability.

  • High Thermal and Corrosion resistance.

  • Earthquake Resistance is ensured by maintaining the stress ratio ( UTS /YS ) above the required level as per the BS Standards.

  • Quality parameters like  Sectional Weight, Tensile Strength, Stress Ratio, Elongation etc are verified regularly during the production process. Computerized Universal Testing Machines ( 40 KN and 100 KN Capacity ) are used for the strength testing. All the laboratory documents are maintained in a traceable manner. Test Certificates are issued upon request.

Copyright © 2011 Hadid Majan L.L.C. All Rights Reserved